Riding On Rodeo

Riding On Rodeo


Add to Cart:


Riding On Rodeo

Riding On Rodeo

Charcoal Grey Creme

Color Dip Application:

Step 1:

  • Clean and prep nails, by pushing cuticle back and shaping nails. Wipe nail clean with an alcohol based cleanser.

Step 4:

  • Shape and buff top of nail with Red Carpet Manicure's Groom Buffer. Wipe with a lint free wipe.

Step 2:

  • Apply a thin coat of Color Dip BASE COAT and quickly dip into COLOR DIP powder. Tap off excess. Repeat on all nails. Reapply Base Coat and repeat color dip steps until you get desired depth of color.

Step 5:

  • Apply ACTIVATOR to all nails and wait 20 seconds. Remove excess ACTIVATOR with a dry lint free wipe.

Step 3:

  • Apply ACTIVATOR to all nails. Follow with a thin layer of Color Dip BASE COAT.

Step 6:

  • Apply 2 thin coats of Color Dip TOP COAT and let air dry.

Color Dip Removal:

  1. Buff off top layer using the RCM Groom Buffer, to break the seal on the top coat.
  2. Place an RCM FOIL WRAP saturated with ERASE onto the nail.
  3. Wrap fingertip tightly and let set for 15-20 minutes
  4. Remove FOIL WRAP by squeezing the nail and pulling. Most of the product should come off inside the foil.
  5. Gently remove any remaining product using an orange wood stick from the cuticle to free edge. Repeat steps if necessary.
  6. Lightly buff the surface of the nail as needed.

Tips & Tricks:

  • Apply thin layer of base coat to nail (thick application can cause lumps).
  • Dip prepped nail directly into color jar at a 45° angle.
  • Do not twist, swirl, stir nail while dipping, this can cause lumps.
  • When applying a dark or neon color, use Color Dip's Sheer Base Powder as the 1st step of dipping.
  • If you have any bare spots in color or want to make color more intense, apply third coat.
  • If excess base or top coat gets on skin/cuticle, quickly remove it with an orange wood stick before dipping into powder.

1055 Expression #1 of ORDER BY clause is not in GROUP BY clause and contains nonaggregated column 'rcm_store.o.date_purchased' which is not functionally dependent on columns in GROUP BY clause; this is incompatible with sql_mode=only_full_group_by
[select p.products_id, p.products_image from orders_products opa, orders_products opb, orders o, products p where opa.products_id = '706' and opa.orders_id = opb.orders_id and opb.products_id != '706' and opb.products_id = p.products_id and opb.orders_id = o.orders_id and p.products_status = 1 group by p.products_id order by o.date_purchased desc limit 6]